Oil and Gas Production

Oil and Gas Production

The total annual cost of corrosion in the oil and gas production industry is estimated to be $1.372 billion, according to a NACE study. That figure can be broken down into $589 million on surface pipeline and facility costs; $463 million annually in downhole tubing expenses; and another $320 million in capital expenditures related to corrosion.

These costs and environmental risks could rise further in the years ahead, as new hydrocarbon sources are found in more challenging environments—deeper reservoirs with higher temperatures and pressures and containing greater concentrations of acid gases.

It is widely recognized within the oil and gas industry that effective management of corrosion will contribute towards achieving the following benefits:

  • Statutory or Corporate compliance with Safety, Health and Environmental policies
  • Reduction in leaks
  • Increased plant availability
  • Reduction in unplanned maintenance
  • Reduction in deferment costs

Assets in the upstream oil and gas environment needing protection from corrosion may include wells, risers, drilling rigs, offshore platforms, pipeline connectors, and more.

Books

Corrosion and Its Control: An Introduction to the Subject, Second Edition

This edition of this classic text is based on notes used by the authors for more than a decade in their course, The Corrosion and Protection of Metals.

Corrosion Basics: An Introduction, 3rd Edition

This book provides general coverage of the wide field of corrosion control. It is designed to help readers being initiated into corrosion work and presents each corrosion process or control procedure in the most basic terms.

Corrosion Behaviour and Protection of Copper and Aluminum Alloys in Seawater (EFC 50)

Copper and aluminum alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships' hulls, and cladding for offshore structures.

CUI Mechanism and Prevention

CUI(Corrosion Under Insulation) is worldwide problem. CUI on carbon steel occurs with water and oxygen and is accelerated by iron rust halogen ion and the conductivity. That mechanism is analyzed more quantitatively to understand the degree of corrosion influence. By using this mechanism the author applied to the actual plants to find it is correct.But some irregular corrosion occurred and is considered why it occurs by means of the investigation of the corrosion samples.

Fundamentals of Designing for Corrosion Control: A Corrosion Aid for the Designer

This book examines factors weighed in the design phase of a project for preventing equipment repair or replacement due to corrosion.

Solution to Corrosion Under Insulation (CUI) with Three Layered CUI Control and CUI Warning Systems

CUI is the most expensive problem in the corrosion history due to their highly corrosive conditions and the limited visual access by thermal jackets. In general CUI is caused by water leakages from the thermal jackets. Visual inspections of steel pipes and tanks by removing the thermal jackets are most reliable way to find CUI locations at present.

Visit the NACE Store for all book titles