Untitled Document
  About NACE Events and Conferences Education NACE Store Membership Journals Community Committees
Section/Area/Region Home ContactsSearch nace.org NACE Members Only

Sections/Areas/Regions

Sections/Areas/Regions Home  |   Resources for Officers  |   Sections Education Packet  |
Class Size Limits

Minimum class size generally is 12. Maximum class size is:

  20 students for CP Level 4
30 students for the Basic Course
24 students for all other courses

 
Classes can sometimes exceed the maximum (by 1 or 2) depending on the course, location, coursework, and instructor. Contact HQ with questions.
 

Headquarters cannot accept more registrations than the maximum number of students unless the area/region/section agrees to hire additional NACE-approved instructors.

The maximum numbers may be used only when the meeting room space allows comfortable seating for students, and equipment practice area if needed. Students will give a poor evaluation of the course if accommodations are not suitable!


Class Schedules

The table below shows the class schedules followed by NACE Headquarters. Sections have flexibility in changing start and end days and daily schedules. However, the length of any class (in hours) cannot be changed.

The exact start date and class times must be included in the Section Education Agreement with headquarters. Once this and all other pertinent information is received by Headquarters, course promotions will begin.

Course Name Schedule
Basic Corrosion Day 1-5 8:00 a.m. to 5:00 p.m.
CIP 1-Day Bridge Specialty Course Day 1 8:00 a.m. to 5:00 p.m.
CIP Level 1 Day 1
Day 2-6
10:00 a.m. to 7:30 p.m.
8:00 a.m. to 7:30 p.m.
CIP Level 2 Day 1
Day 2-6
10:00 a.m. to 7:30 p.m.
8:00 a.m. to 7:30 p.m.
Coatings in Conjunction with Cathodic Protection Day 1
Day 2-6
1:00 to 5:30 p.m.
8:00 a.m. to 5:00 p.m.
Corrosion Control In The Refining Industry Day 1-5 8:00 a.m. to 5:00 p.m.
CP 1-Cathodic Protection Tester Day 1
Day 2-6
1:00 to 6:30 p.m.
8:00 a.m. to 6:30 p.m.
CP 2-Cathodic Protection Technician Day 1
Day 2-6
1:00 to 6:30 p.m.
8:00 a.m. to 6:30 p.m.
CP 3-Cathodic Protection Technologist Day 1
Day 2-6
10:00 a.m. to 6:30 p.m.
8:00 a.m. to 6:30 p.m.
CP 4-Cathodic Protection Specialist Day 1
Day 2-6
1:00 to 7:30 p.m.
8:00 a.m. to 7:30 p.m.
CP Interference Day 1
Day 2-6
1:00 to 6:30 p.m.
8:00 a.m. to 6:30 p.m.
CP Tutorial 1 - Basic Electricity Day 1
CP Tutorial 2 - CP Fundamentals Day 1
CP Tutorial 3 - CP Monitoring/Field Measurement Day 1
CP Tutorial 4 - Stray Current Install/Troubleshoot Day 1
Designing for Corrosion Control Day 1-5 8:00 a.m. to 5:00 p.m.
Internal Corrosion for Pipelines Day 1-5 8:00 a.m. to 5:00 p.m.
Marine Coating Inspection Day 1-3 8:00 a.m. to 5:00 p.m.
MARINE CP2-Cathodic Protection Technician Day 1
Day 2-6
1:00 to 6:30 p.m.
8:00 a.m. to 6:30 p.m.
Offshore Corrosion Assessment Training (O-CAT) Day 1-5 8:00 a.m. to 5:00 p.m.
Protective Coatings & Linings 1 Day 1-5 8:00 a.m. to 5:00 p.m.
Protective Coatings & Linings 2 Day 1-5 8:00 a.m. to 5:00 p.m.
Shipboard Corrosion Assessment Training (S-CAT) Day 1-5 8:00 a.m. to 5:00 p.m.

WebMaster | NACE Contacts | Privacy Policy  | Terms of Use  | Customer Feedback  | About NACE
© Copyright 2000-2008 NACE International, all rights reserved.
If you have questions or comments, please e-mail us at .