About NACE Events and Conferences Education NACE Store Membership Journals Community Committees
Section/Area/Region Home Contacts NACE Members Only

Education/Certification - Pipeline Corrosion Introductory Training (PCIT)
Assessment Search


You may search for assessment holders by name (whole or part) and/or sponsoring company name (whole or part). NACE is not liable for any errors or omissions in this electronic database or results or consequences thereof. For help with questions about NACE data, contact NACE International directly.

Search by Name:
Search by City:
Search by State/Province: (U.S. states and Canadian provinces are abbreviated)
Search by Country:
Search by Company:

Filter by Assessment (show only holders of the selected assessments)

Search for individuals who hold any NACE PCIT assessment(s)
1. Measure Structure-to-Electrolyte Potentials
2. Conduct Close Interval Survey
3. Test to Detect Interference
4. Inspect and Test Cathodic Protection Bonds
5. Inspect and Test Cathodic Protection Isolation Devices
6. Inspect and Verify Test Lead Continuity
7. Repair Damaged Test Leads
8. Install Test Leads by Non-Exothermic Welding Methods
9. Install Test Leads by Exothermic Welding Methods
10. Obtain a Voltage and Current Output Reading from a Rectifier
11. Check for Proper Operation of a Rectifier
12. Troubleshooting Rectifier Bond Connections
13. Repair or Replace Defective Rectifier Components
14. Adjustment of Rectifier
15. Install Bonds
16. Install Galvanic Anodes
17. Install Rectifiers
18. Install Impressed Current Groundbeds
19. Repair Shorted Casings
20. Pipeline Location
21. Visual Inspection of Atmospheric Coatings
22. Prepare Surface for Coating Using Hand and Power Tools
23. Perform Water Pressure Cleaning
24. Prepare Surface for Coating by Abrasive Blasting
25. Apply Coating Using Hand Application Methods
26. Apply Coating Using Spray Applications
27. Use of Coating Inspection Tools
28. Inspect for Physical Damage on Buried or Submerged Pipe
29. Inspect for External Corrosion on Buried or Submerged Pipe
30. Inspect the Condition of External Coating on Buried or Submerged Pipe
31. Measure Pit Depth with Pit Gauge
32. Measure Wall Thickness with Handheld Ultrasonic Meter
33. Measure Corroded Area
34. Insert and Remove Coupons
35. Monitor Probes (On-line)
36. Perform Internal Corrosion Remediation
37. Inspect Internal Pipe Surface
38. Abnormal Operating Conditions - Natural Gas and Hazardous Liquid
39. Abnormal Operating Conditions - Natural Gas Pipeline
40. Abnormal Operating Conditions - Hazardous Liquids

WebMaster | NACE Contacts | Privacy Policy  | Terms of Use  | Customer Feedback  | About NACE
© Copyright 2000-2008 NACE International, all rights reserved.
If you have questions or comments, please e-mail us at .