Course - Coatings in Conjunction with Cathodic Protection

The Coatings in Conjunction with Cathodic Protection (CCCP) course focuses on the control of metallic corrosion by protective coatings and cathodic protection, with coatings as the primary method of control supplemented by cathodic protection.

NACE is recognized as an Authorized Provider of Continuing Education Units by the International Association for Continuing Education and Training (IACET). In order for a learner to “Successfully Complete” a NACE course and thereby receive a Certificate of Completion and CEUs, the following criteria must be met:
•Attend the entire course
•Successfully pass each learning assessment for the course with a score of 70% or higher
Learning assessments may include: a cumulative average quiz score, a practical exam, and/or a written exam.
For learners who do not meet the two criteria above, a retake of the course and the related learning assessments will be required, in order to receive a Certificate of Completion with CEUs and “Successfully Complete” the NACE course.
Disclaimer: This Certificate of Completion denotes successful completion of the NACE course, and should not be interpreted as the award of a NACE Institute Certification.

At the conclusion of the course you will be asked to complete a course evaluation.

See all upcoming classes...  |  Mail/Fax Registration Form (PDF)

  • Personnel who design, test, inspect, apply and monitor various structures that are both coated and cathodically protected.
  • Personnel responsible for making risk management and integrity decisions (managers and engineers)
  • Field personnel and technicians
    • Basic Corrosion Theory and CP Fundamentals
    • Types of Structures Protected by Coatings and CP
    • Synergistic Relationship of Coatings used in Conjunction with CP
    • Advantages and Disadvantages of Coating Types used with CP
    • Selection Criteria, Application, Inspection and Testing of Various Coatings
    • Failure Modes of the Various Coatings in Relationship to CP
    • Disbonded Coatings as Related to External Corrosion and Stress Corrosion Cracking
    • Defining CP Shielding and Non-Shielding Coatings
    • Proper Examination and Evaluation of In-Service Coatings used with CP Coating Performance Testing
    • Discussions of Various CP Survey Techniques (CIS, DCVG, ACVG, Current Requirements, etc.)
    • Evaluation of External Corrosion
    • CCCP Manual on CD
    • Coatings in Conj. w/ CP Manual
    Schedule Summary
     Start TimeEnd Time
    Day 11:00 PM5:30 PM
    Day 28:00 AM5:00 PM
    Day 38:00 AM5:00 PM
    Day 48:00 AM5:00 PM
    Day 58:00 AM5:00 PM
    Day 68:00 AM12:00 PM